Guys,
We have here in TCPDUMP file displayed by Wireshark. It corresponds to a ping from 192.168.30.18 to 192.168.0.100, eg
<code>ping 192.168.0.100
</code>
<code>ping 192.168.0.100
</code>
ping 192.168.0.100
How to understand that ping result is 0% packets loss, but in the TCPDUMP file there are so many “no response found!”
Thanks,
DKay
<code>31 1.677143 192.168.30.18 192.168.0.100 ICMP 78 Echo (ping) request id=0x6728, seq=33144/30849, ttl=3 (reply in 32)
32 1.677335 192.168.0.100 192.168.30.18 ICMP 78 Echo (ping) reply id=0x6728, seq=33144/30849, ttl=126 (request in 31)
38 2.010729 192.168.30.18 192.168.0.100 ICMP 78 Echo (ping) request id=0x6728, seq=33145/31105, ttl=1 (no response found!)
42 2.344119 192.168.30.18 192.168.0.100 ICMP 78 Echo (ping) request id=0x6728, seq=33146/31361, ttl=2 (no response found!)
</code>
<code>31 1.677143 192.168.30.18 192.168.0.100 ICMP 78 Echo (ping) request id=0x6728, seq=33144/30849, ttl=3 (reply in 32)
32 1.677335 192.168.0.100 192.168.30.18 ICMP 78 Echo (ping) reply id=0x6728, seq=33144/30849, ttl=126 (request in 31)
38 2.010729 192.168.30.18 192.168.0.100 ICMP 78 Echo (ping) request id=0x6728, seq=33145/31105, ttl=1 (no response found!)
42 2.344119 192.168.30.18 192.168.0.100 ICMP 78 Echo (ping) request id=0x6728, seq=33146/31361, ttl=2 (no response found!)
</code>
31 1.677143 192.168.30.18 192.168.0.100 ICMP 78 Echo (ping) request id=0x6728, seq=33144/30849, ttl=3 (reply in 32)
32 1.677335 192.168.0.100 192.168.30.18 ICMP 78 Echo (ping) reply id=0x6728, seq=33144/30849, ttl=126 (request in 31)
38 2.010729 192.168.30.18 192.168.0.100 ICMP 78 Echo (ping) request id=0x6728, seq=33145/31105, ttl=1 (no response found!)
42 2.344119 192.168.30.18 192.168.0.100 ICMP 78 Echo (ping) request id=0x6728, seq=33146/31361, ttl=2 (no response found!)